Recent content by CVDaddy

I measure it at 9". The tow loops are even with the bulge in the middle. I have the brush guard and had just the low bar and neither sticks out past the bumper. I have a license plate holder on the winch fairlead and that sticks out to 11 1/2". BTW- I love your build thread

I'd like to buy @Jimmy07 solution too. Please PM me also. Thank you!

Glad to know it's not missing, but there should be something missing. That looks like crap! Engineers started designing the piece on a Friday afternoon then said "the seat hides it, let's go to happy hour!"

I just got my 2020 2500 Laramie Mega Cab back from the body shop yesterday. I was putting all my stuff back in and noticed that it looks like a piece of trim along the bottom is missing. Can anyone confirm that's not how it is supposed to look?

The sucker hose was the diff service at Jiffy Lube in the early nineties. Don't know what they do now. I worked in the pit and did hundreds of diff services. It was only $19.99 to change out about 90% of the fluid.

I have RamBoxes and the Revolver X4S. The foam on the drivers side came out in a large portion of the middle. Kept tucking it back in. Finally it started flapping in the wind so I just pulled it off. The bed seems to seal just as well without it. I go through the car wash and get the same...

Tip: If the D shaped insert comes out with your old shifter, make sure the chamfered end goes in first. The bolt won't line up if you don't notice and put the other end in first. Ask me how I know...

Nope. I'll pay shipping.

UPS says 23.43 and FedEx says 15.32

$ 150 I ordered a Thuren sway bar with billet end links, but I have AEV dual sport lift, so I had to order the 6.75" end links. So the never installed, only unwrapped foam for the picture, billet end links are for sale. They're only a $60 upgrade at time of order, but the universal end links...

My wifi has stopped working a couple times. 6 or so months apart. I disconnected both batteries for and hour and the wifi came back. The Uconnect takes a couple hours to get back to normal. The HVAC just blows warm air and the surround cameras don't work. I learned this from another thread...

I DD my PXL and love it. 25,000 miles so far. Park way out in lots. Always seems some dingus will park right next to me while I'm inside. Maybe their Honda needs shade or a bodyguard. Parking garages are a hard no. Truck is 86" tall. I drove it from AEV in Michigan to Denver and have been...

Thank you Porkchopexpress! I followed your disconnect the batteries, and now my wifi is working again. I'd like to add that the Uconnect4 takes a couple hours to get it's s**t back together. My cameras were gone and the HVAC would only blow warm air. Kinda worried for a while.

Did you get the straps to tighten in the rails? I don't know if I'm doing it wrong, but the bolt bottoms out before it gets anywhere near tight. I'm also wondering if I have the wrong straps. The buckle end is wrong. I contacted Bak and they sent the correct ends, but maybe I have the wrong...

Sorry, that's not a write up. Basically, remove the 5 10mm bolts that hold the lock mechanism. Don't remove the phillips screws, they hold pieces to the other side of the plastic. Look for the broken green piece of plastic, replace it, put back together.