Recent content by cjm368

There is a way to disable it on the vehicle your using - by creating a 1/2 size page first - which lets you access everything, then disabling it in settings. The video walks through it very well

Yes - it is caused by the "smart display zoom" not really being that smart :) Here is a link to a video on how to fix it

Just in case someone else goes down this rabbit hole, perhaps someone else will benefit from my efforts :(... After confirming all of the hardware was on the truck and enabled (Jscan doesn't seem to be able to do it, but AlfaOBD does), checking the fuses and then tracing down he wiring looking...

I've checked the wiring - on mine there is only the connection to the 12 pin plug - so that is good. I put the meter on pin 1 on the 12 pin plug with the truck running, and get .8v...it should be 12v so for some reason power isn't getting to the plug, thus nothing to the cameras to be...

Thanks for the input! I don't have the 5th wheel prep package - but I will check to ensure the body isn't disconnected from the bumper cabling. I did check at the 12 pin plug - but didn't follow it back further. It is the complete package new - all parts listed in the enclosed instructions...

I have part #68527709ab which as far as I can find is for the 2022's

Hi, I bought the 360 trailer camera kit to add with my (newer to me) 2022 RAM 3500 Limited. However I cannot get it to show up on the Uconnect 12 display. I hooked the trailer gateway to the 12 pin on the bumper with 1 camera connected - and ensured it is fully seated (round placement disk...

Thanks - I do have meter

Hi, I have checked all the fuses. I've now got the wiring diagram from Ram...it seems that they are all run off the interior lamps circuit... and given that the right side are working, it can't be as simple as a fuse. I'll start tracing down wires to see if there is a break somewhere. Thanks

Thanks - I tested the switch - there isn't any power to it

Good Day, Trying to track down why the drivers side rambox lighting is out. Tested the switches - no power to the contact switch. Passenger side, and box lighting both work fine. Does anyone have a wiring diagram for them or suffered similar issues? Thanks

HA HA Ha... There is the confusion... it is only the thin chrome "rub rail"... the rest is just the reflection in the paint..... not a bad shine ehh :)

I would say salt too - except, I'm on the west coast of Canada, we get about 2 days of snow a year, that lasts for a day or two usually. are winters are rain (except up in the mountains).

Lucky you! Unfortuantly I didn't have the option...

My truck is almost 3 years old - 2022 Ram 3500 Limited, with 113k KM on it - the front grill and passenger door molding chrome is bubbling! Truck is babied and washed by hand - no way the chrome should be degrading like this so quickly - and of course - out of the 100k warranty that is...