Ram Heavy Duty Forum

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Recent content by bobthemagicman

  1. bobthemagicman

    Power outlet - truck bed

    #12 is for trucks with the RAMboxes #13 is for trucks w/o
  2. bobthemagicman

    115VAC Cargo Switch / Inverter Switch

    I have a 2019 and these were the part numbers for the bezel and the switch. 6PG83TX7ABInstrument Panel Switch Bezel$8.411$8.41 6EM24TX7ACInverter Switch$10.531$10.53 I have them installed and the switch functions (lights up when pushed). I am trying to piece together the rest of the...
  3. bobthemagicman

    Device not supported

    Huh, I thought I was the only one with this issue. It happened to me at least once a month. I can usually get it working by going into the "Projection Manager" in the UConnect system and turning off the projection manager for the connected phone, unplugging the phone, and then plugging it back...
  4. bobthemagicman

    OEM Aux switches

    @jsalbre Thanks for the hint. I was able to find it. I confirmed that the wires are in the dash harness and terminate in the female side of the connector which has no wires in the same spots there are wires in the male connector. I used a continuity tester to confirm each of the six wires. I...
  5. bobthemagicman

    OEM Aux switches

    I have read every page of the DIY thread, the AUX pass-thru wiring thread, and the FAQ thread and I cannot figure out where these wires terminate. As far as I can understand for my truck all the switch wires are already in the harness but the X/Y connector (see attachment) is not included...
  6. bobthemagicman

    (Found) No longer need

    I have a set of OEM headlights from my truck I am looking to sell. Truck only has 35k miles on it currently. I added a couple of pictures for reference. Feel free to PM me if interested.
  7. bobthemagicman

    *SOLD*

    I did sell it, I forgot it was posted here. I will update this listing. Sorry.
  8. bobthemagicman

    LTB 2019+ Painted OEM Bumper

    You still looking for these? I have attached a pic of my truck, is that the color you are looking for? If so PM me or reply here. I have both front and rear. They aren't in perfect condition though, fyi.
  9. bobthemagicman

    *SOLD*

    I have a 32gal OEM fuel tank the Seattle area, also FREE. Out of a 19 w/ 28k miles.
  10. bobthemagicman

    **SOLD** - Air Lift Load Lifter 5000 Ultimate w/ Daystar Cradles

    I sent a PM as well, in case it doesn't end up working out with @Etoimos.
  11. bobthemagicman

    Jump Seat to Console Swap power fault problem - need help

    Welp, cost me $300 and a trip to the dealer but shamefully it was just a cut wire. I guess I pulled too hard on the wire harness at some point. I figured I would post in case anyone was curious.
  12. bobthemagicman

    Jump Seat to Console Swap Process

    PN: 68366628AA Link is just for reference so you know I am not full of $h!t. Shop around you can probably find a better price somewhere else, except ebay (unless it's used).
  13. bobthemagicman

    Jump Seat to Console Swap Process

    I have seen this asked quite a bit across the different threads and forums. The answer to my knowledge is no they are slightly different w/ different part numbers in the Mopar parts catalogue.
Back
Top