Recent content by BighornHDRam

Here's the DPF gauge that I was speaking of that shows a different % from the digital gauge, I should of added the fuel gauge % as well but forgot to.

Here is the one I bought for my 2026 3500 Mega Cab Limited, I bought it direct from FITCAMX and not sure if they sell on Amazon. I guess I should of provided a link as well. https://fitcamx.com/collections/for-dodge-ram/products/fitcamx-dash-cam-for-ram-1500?variant=42727641055404

Some more pics.

I purchased one of the FITCAMX dash cam for my 2026 Limited Mega Cab based on a YT user TrukStuf. I ordered it up from their website and it showed up air freight/USPS from China in about 2 weeks even during the Christmas holiday shipping. My model was model C based on my mirror setup on the...

Ya I know 3 hours as I don't move so fast anymore, I have had Bilateral shoulder replacements from the VA before I was 50 and have a upcoming T7-L2 spinal fusion in my near future. I tucked the wire for the rear camera into the headliner past the headliner speakers avoiding the side curtain...

I have this in my 2026 and use the Anti-Glare on the UC5 and has been great, I also had it in my 2025 Z06 with zero issues as well. It took 4 screens at getting the digital display looking right so I had to buy and extra 2 units on top of the original 2 that came with the kit. You just have to...

I installed one of the FitCamx Front 4k/Rear 1080p camera kit on my 2026 3500 Mega Cab, took about 3 hours to do the complete install taking pictures and such as I don't move so fast anymore dropping the headliner a bit and running the rear wire and removing a side interior body panel and such...

After thinking about this, I'm thinking the Banks readings are probably correct and the OEM Ram gauges are the ones that are off to provide cushion for the average consumer. As an example if I fill my Diesel tank the digital dash will look to be full but the Banks gauge will display around 85%...

I ordered a Pedal Monster and the new updated iDash Data Pro from a 2024 Ram 3500 in Dec 2025 for my 2026 3500 Limited Mega Cab 6.7 and have been running it for about 3 weeks and running the current version firmware v1.11.0 with no issues. The new interface to change the gauge layout from the...

I use Aux 2 and A500 RD/WH wire to the back, I select Aux #2 when I want to turn them on/off. They automatically turn off if you turn the truck off if you setup correctly in commercial settings, but if you turn them on and back up don't forget to turn them off before you drive down the road as I...

No relay needed as the Aux switches already have them and they turn off with the truck the way I have it setup in the commercial settings, to de-pin the connector you slide the white push in part out and I remove it to expose the small clip that holds the wire connector in the housing. Once you...

I decided to get those other pics of the engine bay and under the dash connection points on my 2026 3500 Limited Mega Cab

I just did this on my 2026 3500 Limited Mega Cab for my swapped over BD/CJC backup lights from my 2022 but I used Aux 2 and A500 RD/WH wire to the back. I pulled all parts including the jumper wire for the under hood Aux connectors and plugged them in to the connectors. I hate where they stuck...

I'm not sure if they are aware or don't care or what. I went to my dealers inventory where I bought my 2026 Limited Mega Cab and found a 2026 2500 Limited Mega Cab with the same options as mine. Under the Equipment Listing from Ram it states TIRE PRESSURE MONITORING DISPLAY unlike on the 3500 it...

I picked up one of these today to try out for putting groceries and such in while I was at Dollar General, total cost $6.25. I also did the subwoofer removal in this thread. https://hdrams.com/forum/index.php?threads/2026-3500-limited-mega-cab-subwoofer-removal-write-up-for-the-storage.21038/