Air assist on 3500

[Ck88]

can this system be used to “air up” inflate tires since it has an air tank with nozzle for an air hose?


Sent from my iPhone using Tapatalk

 

[mountainears]

No.


Sent from my iPhone using Tapatalk

 

[AH64ID]

Unfortunatly not, the compressor is sized for that kind of duty cycle and the software would freak out thinking there was a bag leak.

It sure would be nice if you could thou.

I installed a ViAir 400C under my bed as my OBA.

 

[Ck88]

No.


Sent from my iPhone using Tapatalk

Thank you


Sent from my iPhone using Tapatalk

 

[Ck88]

Unfortunatly not, the compressor is sized for that kind of duty cycle and the software would freak out thinking there was a bag leak.

It sure would be nice if you could thou.

I installed a ViAir 400C under my bed as my OBA.

Many thanks; will also look at ViAir


Sent from my iPhone using Tapatalk

 

[jsalbre]

Unfortunatly not, the compressor is sized for that kind of duty cycle and the software would freak out thinking there was a bag leak.

It sure would be nice if you could thou.

I installed a ViAir 400C under my bed as my OBA.

Out of curiosity, where did you mount your Viair? I have a 450C I need to mount up soon. On my Gladiator it fit between the spare tire bracket and the bed, but there’s not that much clearance on the Ram.

 

[AH64ID]

Out of curiosity, where did you mount your Viair? I have a 450C I need to mount up soon. On my Gladiator it fit between the spare tire bracket and the bed, but there’s not that much clearance on the Ram.

It’s under the front left corner of the bed. I am hanging it from the bed with ViAir HD isolators. I ran an airline to the back of the bed and have the air chuck by the bed light switch.

 

[jsalbre]

It’s under the front left corner of the bed. I am hanging it from the bed with ViAir HD isolators. I ran an airline to the back of the bed and have the air chuck by the bed light switch.

View attachment 55062View attachment 55063View attachment 55064View attachment 55065

Thanks for that. Is the mounting plate attached through the bed interior wall?

 

[AH64ID]

Thanks for that. Is the mounting plate attached through the bed interior wall?

4 holes in the bottom of the bed.