What did you do TO your RAM today?

[HORam]

It is a Nash deck. i was local yes.
Ya its two place, i didn't take a pic with the other sled loaded

I'd like to see more pictures of this setup. Looks sweet!

Sent from my SM-N975U using Tapatalk

 

[CdnHD]

I Installed a sled deck the other day.

That looks amazing! I'll pm to get some more info on your setup if you don't mind

 

[wpgram]

Here are some pics of the extensions pushed it.

Its a 7' deck. i bought an 8' but exchanged it as it was too long for everyday life. This one fits much better

 

[Highcountry]

Installed some Weather Tech no drill mudflaps and let 20 pounds of air pressure out of my tires. They were at over 80.

 

[MSundet]

Here are some pics of the extensions pushed it.

Its a 7' deck. i bought an 8' but exchanged it as it was too long for everyday life. This one fits much better

That’s awesome I love your truck!!


Sent from my iPhone using Tapatalk

 

[Pronto]

Started playing with AlfaOBD. Got my speedometer accurate after a few tries, turned off my panic alarm, enabled foglights with headlights, added the current gear indicator. Took my boat trailer in to get the TTPMS sensors installed. Since I was doing that, I went ahead and upgraded my china bombs that came with the trailer to Goodyear Endurance tires. Next up is to change my TPMS threshholds, hopefully just through the UConnect, and initialize the TTPMS system. But not before I take advantage of a nice weather day tomorrow and go fishing.

 

[SBelt]

Installed a Tyger front bumper guard with a pair of 6.5" lights and a 20" light. Hooked up via Trigger 4 wireless switch pod.

 

[Trooper]

I removed this... rear sway bar link, the other side also bent but not as bad.. no idea how or why, but installed the Thuren rear links, much more robust and longer and since I have a 1" rear lift it matches their 1" spring lift. I can add pictures at the weekend if anyone interested but to dark to get anything of use during the week. http://www.cjcoffroad.com/Thuren-14-2500-REAR-SB-LINKS-p/tf-4lrsb-lkit.htm and the price is not that much more than what dealer want for the OEM part

.

 

[kristof]

Just finished installing the air lift bag system and remote compressor.

Compared to the CP3 swap last weekend this was cake haha.

Should level out the camper pretty darn well

Sent from my iPhone using Tapatalk

How much for everything? Around $1000?

 

[rossagge]

Replaced my Rams Head tailgate emblem with this. And installed my old man comfy sheepskin seat covers.

Sent from my LG-US701 using Tapatalk

 

[LateToTheParty]

Replaced my Rams Head tailgate emblem with this. And installed my old man comfy sheepskin seat covers.

Sent from my LG-US701 using Tapatalk

Did you source that from Ikonic?

 

[rossagge]

Did you source that from Ikonic?

No. I did look at their emblems. Found this one on ebay from seller overlandspy. Appears to be the same acrylic with same adhesive for a few bucks less.

Sent from my SM-P610 using Tapatalk

 

[NordicNevs]

How much for everything? Around $1000?

1080 from SD spring


Sent from my iPhone using Tapatalk

 

[NordicNevs]

I think o have some tensioner pulley rattle

Ordered a new Gates set up (belt and tensioner) from Genos

Sent from my iPhone using Tapatalk

 

[kristof]

1080 from SD spring


Sent from my iPhone using Tapatalk

That's not bad. I might look into that system

 

[RichM752]

Just finished installing the air lift bag system and remote compressor.

Compared to the CP3 swap last weekend this was cake haha.

Should level out the camper pretty darn well

Sent from my iPhone using Tapatalk

I'll be doing the same when my truck arrives. Also BW gooseneck hitch. Would you happen to have wheel well liners? And if so, how'd the install go ?

 

[NordicNevs]

I'll be doing the same when my truck arrives. Also BW gooseneck hitch. Would you happen to have wheel well liners? And if so, how'd the install go ?

I don’t have rear liners but it wouldn’t be an issue as the kit forces an offset on the inner side of the leaf pack and upper bump stop. You’ll have plenty of clearance.

If it’s a 2500 with coils then I cannot speak to that.


Sent from my iPhone using Tapatalk

 

[RichM752]

I don’t have rear liners but it wouldn’t be an issue as the kit forces an offset on the inner side of the leaf pack and upper bump stop. You’ll have plenty of clearance.

If it’s a 2500 with coils then I cannot speak to that.


Sent from my iPhone using Tapatalk

Oh yeah, forgot to mention that its a 2500. I stopped by the local Ram dealer today to look but the only truck with liners was a 1500.

 

[NordicNevs]

Oh yeah, forgot to mention that its a 2500. I stopped by the local Ram dealer today to look but the only truck with liners was a 1500.

Worse case heat gun it lol


Sent from my iPhone using Tapatalk

 

[Kimo7]

I'll be doing the same when my truck arrives. Also BW gooseneck hitch. Would you happen to have wheel well liners? And if so, how'd the install go ?

I did the same install on my 2500 that has OEM liners, no problems, fit like a glove. The liner stops just above the chassis, doesn’t come down far enough to interfere. I posted some pics below to show how it sits on the axle outside of the coil springs. I feel the value of them when I’m hooked up to my travel trailer that’s pretty heavy. Worth the investment in my opinion.