robbyreneeward
Active Member
- Messages
- 201
- Reaction score
- 189
- Points
- 43
Duh of course lol. I don’t wanna run wheel spacers either and wanna run stock wheels.
Sent from my iPhone using Tapatalk
Ram Heavy Duty Forum
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Anyone running a 295/65/20 on stock suspension?
- Thread starter robbyreneeward
- Start date
Duh of course lol. I don’t wanna run wheel spacers either and wanna run stock wheels.
Sent from my iPhone using Tapatalk
The rub really isn’t bad. Just a little at full lock. You almost can’t feel it. I’m just anal about stuff like that.
How is the road noise compared to what you took off? I'm thinking the same. tire.295 65 20 Yoko Geolander X AT
Off road stock suspension NE.
SoldierOfTheLaw
Active Member
- Messages
- 78
- Reaction score
- 135
- Points
- 33
I can’t give an honest reply yet. My truck has 490 miles on it and the tires went on at 344.
Since install all trips have been local and short.
I’m planning to head up to hunting camp this weekend so I’ll get about 300 miles round trip with about 200 of those on the highway.
I’ll update this thread when I’m back.
Since install all trips have been local and short.
I’m planning to head up to hunting camp this weekend so I’ll get about 300 miles round trip with about 200 of those on the highway.
I’ll update this thread when I’m back.
robbyreneeward
Active Member
- Messages
- 201
- Reaction score
- 189
- Points
- 43
Razzman
Well-Known Member
285/65R20 on mine and they rub the sway bar arm on one side. Nothing major just at full lock
SoldierOfTheLaw
Active Member
- Messages
- 78
- Reaction score
- 135
- Points
- 33
Finally got out on the highway for a decent ride. Didn’t notice any tire noise. Windows up and cruised @75-80 up the PA turnpike and I-81.
Lie-o-meter showed 12.8 round trip with a bunch of short trips and driving in the fields.
Sounds about right considering I’ve got less than 900 miles.
Lie-o-meter showed 12.8 round trip with a bunch of short trips and driving in the fields.
Sounds about right considering I’ve got less than 900 miles.
Ostracize
Well-Known Member
Razzman
Well-Known Member
I noticed the front axle offset is to the right side which of course is where it rubs on the Thuren sway bar. Wish they'd quit offsetting the axle.
Ah, you didn't say Thuren in the first reply.
That offset is a function of the track bar at ride height and it's going to shift around so a little extra clearance is needed. With a solid axle on coils, the only way to avoid that is to convert to a 4 link.
Do they rub?295 65 20 Yoko Geolander X AT
Off road stock suspension NE.
Toyotaguy
Active Member
Got my 295/65r20 on today. Went with Yokohama x-at
It runs just barley at full lock, I can’t even feel the rub I just hear it.
Sent from my iPhone using Tapatalk
I second that!!
Got my 295/65r20 on today. Went with Yokohama x-at
It runs just barley at full lock, I can’t even feel the rub I just hear it.
Sent from my iPhone using Tapatalk
Attachments
G Mcpherson
Well-Known Member
I have 285-65-20 Cooper AT3. Thuren Front Coils at 1.75". Thuren Sway Bar. Slight Rub on the Right side Radius Arm.
Toyotaguy
Active Member
What psi are you guys running your tires at? I ran my firestones at 55 front 50 rear.
I set the Yokohamas up the same way and the front seemed a little low visually so I bumped them up to 60.
Sent from my iPhone using Tapatalk
I set the Yokohamas up the same way and the front seemed a little low visually so I bumped them up to 60.
Sent from my iPhone using Tapatalk
tkbenziger
Member
- Messages
- 43
- Reaction score
- 61
- Points
- 18
Did the exact same today but also did Thuren High Clearance Sway bar. Full lock, no rub
G Mcpherson
Well-Known Member
Nothing on the Radius Arms?