2022 Ram HD Builds and orders - Post and discuss your TRUCK order here! ** NEW USERS READ POST #1 **

[Myfast70]

Got a surprise update from Sandi this morning. My truck shipped October 30 and is due in Louisiana Nov 7. She warned me there are only 5 truck drivers servicing ALL of Louisiana so it could take up to 3 weeks to arrive at the store. I’m starting to get the new truck shakes . Now the mad scramble to assemble all the accessories I need to get installed/order…

Well, I hope a similar timeline holds for you as well. Mine arrived at the rail yard on 10/27 and got an email from Aaron this morning stating that it has arrived at their dealership (11/2)

Just landed at dealer. Ordered August 3. 2500 CD limited in maximum steel. Off to Michigan to AEV.

Crazy how much different your MSM looks than mine, looks a bit darker and no blueish color to yours! I really like the color for that reason, it really flops around in different light.

Really interested in how the shipping process goes, how far you’re shipping, and the cost.

I will pm you those details tomorrow but was quoted a range of $1000-1200. I live in Phoenix, AZ and according to the map on my phone it is 1353 miles door to door. I may be over simplifying it but it sounds like it is just under $1 per mile ($0.74/ mile @ $1000 quote, $0.89/ mile @ $1200 quote)

 

[Thatjonesboy_67]

Well the big day has finally arrived, err my truck has finally arrived!! Here is my timeline for my truck ordering process. I truly cannot say enough about everyone at Mark Dodge, everyone there has truly been a first class act and this has been the easiest vehicle purchase I have ever made. They all went the extra mile and I appreciate more than I can express to them. I really wish they were local to me as I would consider buy new vehicles more often. If anyone had any hesitations about using Mark Dodge, no reason to have any at all. I took care of all the $ stuff today and should be making the shipping arrangements tomorrow too. Hope to have it in the next week or two at most.

6/8 - order placed
10/15 - truck built
10/16 - truck shipped
10/27 - truck showed up at rail yard
11/2 - got an email the truck is at the dealer!!

Really interested in how the shipping process goes, how far you’re shipping, and the cost.

Am also intrested in the shipping process!

 

[ColoMike]

How come no one posts pictures of their interiors? I'm still waiting to see an interior picture of a Longhorn in Mountain Brown.

Edit: My bad. I see Myfast70 did post a picture of his interior.

 

[Pizziola29]

Well, I hope a similar timeline holds for you as well. Mine arrived at the rail yard on 10/27 and got an email from Aaron this morning stating that it has arrived at their dealership (11/2)




Crazy how much different your MSM looks than mine, looks a bit darker and no blueish color to yours! I really like the color for that reason, it really flops around in different light.

View attachment 24839





I will pm you those details tomorrow but was quoted a range of $1000-1200. I live in Phoenix, AZ and according to the map on my phone it is 1353 miles door to door. I may be over simplifying it but it sounds like it is just under $1 per mile ($0.74/ mile @ $1000 quote, $0.89/ mile @ $1200 quote)

I know right? Love this color for it varies a bit. I paid $1450 round trip to Michigan and back from California . Love your night edition as well!


Sent from my iPhone using Tapatalk

 

[Myfast70]

How come no one posts pictures of their interiors? I'm still waiting to see an interior picture of a Longhorn in Mountain Brown.

I posted an interior pic that is on the previous page. I won't see the truck in person until it arrives here so I only have the three pics that Aaron had sent me this morning. Here you go sir! The interior screen is insane large too

 

[Myfast70]

Am also intrested in the shipping process!

Ok, I'll just post up rather than pm'ing as I don't think I'm revealing any secrets.

Is that a Camaro in your avatar pic? What class do you run?

 

[Thatjonesboy_67]

Ok, I'll just post up rather than pm'ing as I don't think I'm revealing any secrets.

Is that a Camaro in your avatar pic? What class do you run?

Yes sir 69 camaro built by rick jones.. we run local class here in nc called big dog.. 740 cubic inches 2 stages nitrous weigh 2450 3.85 187 in 1/8 mile. Was built for pro nitros in the pdra series

 

[Myfast70]

Yes sir 69 camaro built by rick jones.. we run local class here in nc called big dog.. 740 cubic inches 2 stages nitrous weigh 2450 3.85 187 in 1/8 mile. Was built for pro nitros in the pdra series

Very nice! I bet the first 330' in that car is insane. I'm building a mid to upper 7 sec street car right now. If all works as intended I should be able to drive it to the track in full street trim, run 4.8-4.9 in the 1/8, 7.5-7.7 in the 1/4 and drive it back home with the a/c on Only time will tell but I'm allowed to dream, lol. BTW, this car should weigh in around 3300lbs with me in it, wish I was closer to your fly weight, would make my goals a little easier. This is in a twin turbo Coyote swapped Buick Grand National by the way, so a nice & aerodynamic brick

 

[Thatjonesboy_67]

Very nice! I bet the first 330' in that car is insane. I'm building a mid to upper 7 sec street car right now. If all works as intended I should be able to drive it to the track in full street trim, run 4.8-4.9 in the 1/8, 7.5-7.7 in the 1/4 and drive it back home with the a/c on Only time will tell but I'm allowed to dream, lol. BTW, this car should weigh in around 3300lbs with me in it, wish I was closer to your fly weight, would make my goals a little easier. This is in a twin turbo Coyote swapped Buick Grand National by the way, so a nice & aerodynamic brick

.926 60 ft 2.53 330ft

 

[Thatjonesboy_67]

Very nice! I bet the first 330' in that car is insane. I'm building a mid to upper 7 sec street car right now. If all works as intended I should be able to drive it to the track in full street trim, run 4.8-4.9 in the 1/8, 7.5-7.7 in the 1/4 and drive it back home with the a/c on Only time will tell but I'm allowed to dream, lol. BTW, this car should weigh in around 3300lbs with me in it, wish I was closer to your fly weight, would make my goals a little easier. This is in a twin turbo Coyote swapped Buick Grand National by the way, so a nice & aerodynamic brick

 

[Myfast70]

View attachment 24845

Damn that thing moves out! Here's a rendering of my brick. It's in paint jail currently

 

[dkwagner]

Ordered my Laramie MC Hemi 06/09 and STILL in D status.

Ordered Laramie MC Hemi 5/17 and still D status since 6/3. NOT happy.

 

[mbarber84]

Well, I hoped I helped some people here early on and some later, but the corporate shipping info sucks! The info is correct through the paint and to the vendor or storage, after that its a crapshoot, my truck still shows sitting on a train in Mexico, amazingly, its also at the dealer! When I go look at it I will take and post pics, I got the Light Frost interior. I apologize to those I was giving bad information to, after all FCA cant be wrong, right! Oh except for the build sequencing which sucks! I hope your trucks showed up on time to those I was dealing with daily, and Combra, the 2nd times the charm!

Pretty sure I can speak for everyone in saying you have nothing to apologize for. We all very much appreciate the information you’ve been supplying.
Glad to hear your truck is almost home. It is well deserved


Sent from my iPhone using Tapatalk

 

[Grayson]

@brv10 Off with your head!

Congrats on getting your truck.

 

[AF_Hemi]

No one deserves their trucks first more than @brv10 and @OfficerDirtySanchez! Congrats!!

 

[Combra6589]

Hey dont feel bad. I ordered one may 24 and found out 3 weeks ago the dealer was being bought out and the gm and staff couldn't guarantee they would have a job with the new owners (big dealer company), nor could they guarantee the price they quoted me would stay intact. You better believe i cut bait and run at that 6000 dollar question mark. I ended up going to mark dodge...oh well i got nothing but time.

Sent from my SM-G996U using Tapatalk

Yikes

 

[Combra6589]

Congrats bud @brv10

 

[tnpete]

@brv10 Enjoy the new ride, I'm sure my Sat Build will fall though. I have it on good Authority, its not going to happen.

 

[Wesk035901]

Hey everyone, new here and have been scrolling through a lot lol. I ordered my 2500 mc on aug/23. A buddy of mine found this and just seeing if anyone agrees with this eta? 22-26 weeks?! My dealer first told me 8-12 no problem and now it's up to 12-16.

 

[MegaStro]

Hey everyone, new here and have been scrolling through a lot lol. I ordered my 2500 mc on aug/23. A buddy of mine found this and just seeing if anyone agrees with this eta? 22-26 weeks?! My dealer first told me 8-12 no problem and now it's up to 12-16.

Crap shoot, just hang on for the ride