What did you do TO your RAM today?

[Scooter29]

Installed a Curt 7 way plug for my slide in truck camper.

 

[Crusty old shellback]

Couple things this weekend.

Looks good but you need to cut that exhaust pipe and tuck it in.

 

[H3LZSN1P3R]

Looks good but you need to cut that exhaust pipe and tuck it in.

That looks pretty good, dont wanna hide the 150+$ tip lol

 

[Myfast70]

Posted this in the Mudflaps thread, but cross posting here too.

Just picked up a 4pc set of Husky flaps for $15 on Amazon Warehouse. Couldn’t believe it, we’ll see if that’s what actually shows up.

Says they have more…

Husky Liners - 58056 - Fits 2019-21 Ram 2500/3500 with OE Fender Flares (not Power Wagon) Custom Front and Rear Mud Guards, Black https://www.amazon.com/dp/B084DVXQR5/ref=cm_sw_r_cp_api_glt_fabc_ACMCCE372NH2K10YDNJB

Well bummer, price went up to $67.40

 

[RAM_Dad]

Well bummer, price went up to $67.40

I still see it, went up to $17. If you’re on the mobile app, scroll down. Not sure where it shows up on a PC but just look for the used option.

 

[Brutal_HO]

FYI, there's a Buyer Intel thread in the buy/sell/trade forum. Post up deals there if you find them!

 

[freeram]

Well bummer, price went up to $67.40

Same here. $67.40. NVM found them for $17

 

[snayte]

Question for both of you, can the Ramboxes be opened up while the cover is rolled up all the way to the front?

Fishnerd, do you have a pic of the spot/ area you sanded for clearance?


Thanks!

Yes the boxes will open either way. When the cover is rolled up it ends up is in front of the box cover.

 

[snayte]

If you are looking at the top of the lid, its area right behind where it says “ram box” here is a pic before i sanded it you can see the lid starts curving inward.
View attachment 23156

So did you remove the cover from the box or take the rail off to get at that edge?

My whole cover to the tonneau rail is is a tighter fit than that. For instance, I do not have the gap that is shown near the hinge in the lower part of your picture. But I did notice that there is a jagged almost unfinished edge all along the inside of the lid. I think just smoothing that over would help a bunch. You can actually see what I am referring to in your picture.

 

[snayte]

Posted this in the Mudflaps thread, but cross posting here too.

Just picked up a 4pc set of Husky flaps for $15 on Amazon Warehouse. Couldn’t believe it, we’ll see if that’s what actually shows up.

Says they have more…

Husky Liners - 58056 - Fits 2019-21 Ram 2500/3500 with OE Fender Flares (not Power Wagon) Custom Front and Rear Mud Guards, Black https://www.amazon.com/dp/B084DVXQR5/ref=cm_sw_r_cp_api_glt_fabc_ACMCCE372NH2K10YDNJB

Dang it, I just installed those.

 

[Myfast70]

Yes the boxes will open either way. When the cover is rolled up it ends up is in front of the box cover.

Thank you sir!

 

[Myfast70]

I still see it, went up to $17. If you’re on the mobile app, scroll down. Not sure where it shows up on a PC but just look for the used option.

Ah ok, found it and ordered them, thank you!

 

[Eatonpcat]

Posted this in the Mudflaps thread, but cross posting here too.

Just picked up a 4pc set of Husky flaps for $15 on Amazon Warehouse. Couldn’t believe it, we’ll see if that’s what actually shows up.

Says they have more…

Husky Liners - 58056 - Fits 2019-21 Ram 2500/3500 with OE Fender Flares (not Power Wagon) Custom Front and Rear Mud Guards, Black https://www.amazon.com/dp/B084DVXQR5/ref=cm_sw_r_cp_api_glt_fabc_ACMCCE372NH2K10YDNJB

Thanks for the heads up...Just ordered a set for $18.17 Shipped, should receive on Wednesday.

 

[CdnHO]

It’s coming…IT’S COMING!! I am not ready…..I AM NOT READY!! Forecast for my area is scattered flurries on Wednesday .

My condolences. I am taking my big ass to south Texas in a couple of weeks. Allergic to the white stuff.

 

[GPurcell01]

It's not what I did to mine but my father's. He got a full 2" Thuren kit with the Fox IFP's and I added in the King steering stabilizer for him. Learned some good tricks to use once I get and install mine. It wasn't anywhere near as difficult as I thought it would be.









Very controlled ride with the kit installed. I'm even more excited about getting mine.

 

[freeram]

It's not what I did to mine but my father's. He got a full 2" Thuren kit with the Fox IFP's and I added in the King steering stabilizer for him. Learned some good tricks to use once I get and install mine. It wasn't anywhere near as difficult as I thought it would be.

View attachment 23287

View attachment 23288

View attachment 23289

View attachment 23290

Very controlled ride with the kit installed. I'm even more excited about getting mine.

Looks great, nicely done.

 

[Eatonpcat]

Thanks for the heads up...Just ordered a set for $18.17 Shipped, should receive on Wednesday.

Looks like I got so excited that I ordered them and now realize that they are for trucks with flares (SOB). OOPS!

Anyone wanna with OEM flares want to buy some Husky mud flaps? LOL

 

[Lary0071]

Looks like I got so excited that I ordered them and now realize that they are for trucks with flares (SOB). OOPS!

Anyone wanna with OEM flares want to buy some Husky mud flaps? LOL

I want the OEM ones for a dually with the flares... they wouldn't happen to be dually versions?

Sent from my SM-N986U1 using Tapatalk

 

[RPS1030]

It’s coming…IT’S COMING!! I am not ready…..I AM NOT READY!! Forecast for my area is scattered flurries on Wednesday .

We are pushing 10” of accumulation so far. Got a few more hours until the forecast says it changes to rain.

 

[unclelala]

We are pushing 10” of accumulation so far. Got a few more hours until the forecast says it changes to rain.

View attachment 23373

Its just not fair mother nature does this to our beloved toys!